Please use this identifier to cite or link to this item: http://lib.kart.edu.ua/handle/123456789/194
Title: Алгоритм подбора размеров сталебетонных балок по несущей способности, исключающей работу растянутой зоны
Other Titles: Алгоритм підбору розмірів сталебетонних балок за несучою здатністю, що виключає роботу розтягнутої зони бетону
Algorithm calculation of reinforced concrete beams on the carrying capasity excluding the operation of the extendedarea of concrete
Authors: Кобзєва, Олена Миколаївна
Петров, Анатолій Миколайович
Ігнатенко, Андрій Bасильович
Kobzyeva, Olena
Petrov, Anatoliy
Ignatenko, Andriy
Keywords: сталебетонная балка
несущая способность
опасные точки
предельные напряжения
сталебетонна балка
несуча здатність
небезпечні точки
граничні напруження
reinforced concrete beam
carrying capacity
unsafe points
limiting stresses
Issue Date: 2016
Publisher: Український державний університет залізничного транспорту
Citation: Кобзева, Е. Н. Алгоритм подбора размеров сталебетонных балок по несущей способности, исключающей работу растянутой зоны [Текст] / Е. Н. Кобзева, А. Н. Петров, А. В. Игнатенко // Збірник наукових праць Українського державного університету залізничного транспорту. - 2016. - Вип. 162. - С. 20-27.
Abstract: RU: Предложен алгоритм подбора размеров поперечного сечения бетона и стальной полосы сталебетонных балок по несущей способности при выполнении закона Гука. Разрушение балки происходит по нормальному сечению. При этом в бетоне и стальной полосе в опасных точках действуют предельные напряжения. EN: The concrete beam with external reinforcement in the form of sheet steel - reinforced concrete beam has been considered in the article. The concrete structures are known to allow using building materials more efficiently, that leads to concrete and steel economy. The matching algorithm for selecting cross-sectional dimensions of the concrete and steel strip concrete beams on the bearing capacity according to Hooke’s law has been offered. The destruction of the beam takes place on a normal section. Thus in the concrete and steel strip in hazardous locations there is limit voltage. This algorithm allows simplifying the selection of sizes of cross-sections steel-concrete beams. More over there have been received the expressions including a bending moment that allows performing the calculation for any loads.
URI: http://lib.kart.edu.ua/handle/123456789/194
ISSN: 1994-7852
Appears in Collections:Випуск 162

Files in This Item:
File Description SizeFormat 
Kobzyeva.pdf196.08 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.