Please use this identifier to cite or link to this item: http://lib.kart.edu.ua/handle/123456789/134
Title: Визначення потрібної міцності прокладного шару безбаластного мостового полотна на етапах монтажу та експлуатації
Other Titles: Determination of the necessity of the strength of the laying layer of ballastless bridge deck on the stages of installation and operation
Authors: Мірошніченко, Сергій Валерійович
Звєрєва, Аліна Сергіївна
Miroshnichenko, Sergsii
Zvierieva, Alina
Keywords: плита безбаластного мостового полотна
навантаження
прокладний шар
міцність прокладного шару
stove ballastless bridge deck
load
the laying layer
strength of the laying layer
Issue Date: 2017
Publisher: Український державний університет залізничного транспорту
Citation: Мірошніченко, С. В. Визначення потрібної міцності прокладного шару безбаластного мостового полотна на етапах монтажу та експлуатації / С. В. Мірошніченко, А. С. Звєрєва // Збірник наукових праць Українського державного університету залізничного транспорту. - 2017. - Випуск 168. - С. 111-117.
Abstract: UA: У статті виконано аналіз існуючих конструкцій мостового полотна, які подано двома типами: на залізобетонних плитах та на дерев’яних поперечинах. Також проведено аналіз пружно-деформованого стану та виконані необхідні розрахунки впливу зовнішніх сил на прокладний шар. На підставі отриманих результатів уточнені вимоги до необхідної міцності прокладного шару на момент монтажу та експлуатації.
EN: In recent years significantly increased the volume of work associated with the bridge replacement canvas on wooden bar in. Besides ending the life of ballastless bridge deck, which have begun to use more than 40 years ago. Also bridge deck on stoves BMP has its drawbacks. So the problem laying layer and currently relevant. To develop new laying layer with high durability, strength, adaptability is important to consider its complex elastic-deformation condition. The article analyzed elastically deformed state and performing the necessary calculations. Given the large number of different types and sizes of stoves ballastless bridge deck and how to load different from them laying layer stoves were selected the most unfavorable transmission of load. Based on the results specified requirements for the necessary strength of laying layer at the time of installation and operation: - rapid entry required strength of 1 MPa at 1 day; - 5 MPa at 28 days.
URI: https://lib.kart.edu.ua/handle/123456789/134
ISSN: 1994-7852 (рrint); 2413-3795 (оnline)
Appears in Collections:Випуск 168

Files in This Item:
File Description SizeFormat 
Miroshnichenko.pdf220.63 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.